Sale!

Camburg 24-25 Toyota Tacoma Performance Slapper Lower Arm Kit

Code: CMBCAM-310287

Our Camburg lower control arms take your Tacoma’s suspension to the next level. Being stock length, you’re able to use your existing coilovers and upper control arms with no need for aftermarket fenders. We’ve incorporated our optional Slapper bump stop system for additional bottom out control and damping. This allows for a plush ride through the small stuff that doesn’t bottom out easily through the bigger hits and G-outs. In stock width configurations, the Slapper bump stop system performs better than a secondary bypass shock and packages much easier. Designing these arms, we set them up for maximum useable wheel travel along with an optimized shock motion ratio. CAD/CAM engineered, the internally boxed construction is considerably stronger than the stock arms and were designed to maximize ground clearance and off-road performance. We include bolt-on aluminum skid plates for added protection. Our Camburg X-Joint XL is an extreme performance, all-weather, all conditions, high angle ball joint that is considerably stronger than anything on the market with its heat-treated 4340 construction. This allows for maximum wheel travel, lower maintenance, longer longevity and a lighter steering response compared to a uniball. We use FK 1? uniballs at the frame rather than cheap bushings that constantly bind and flex under braking. Uniballs allow for zero binding and have zero flex under braking, so your geometry and alignment is always consistent. The pivot spacers have better clamping force in the frame mounts due to the increased surface area which keeps the holes from wearing over time or the alignment cams coming loose and moving while in use. Ready to install with all the necessary hardware included, these are by far the strongest stock length aftermarket arms out on the market. Combine these with our upper control arms, Slapper bump stop system and aftermarket coilovers for the ultimate stock width setup. This Part Fits: Year Make Model Submodel 2024-2025 Toyota Tacoma Limited 2024-2025 Toyota Tacoma SR 2024-2025 Toyota Tacoma SR5 2024-2025 Toyota Tacoma Trailhunter 2024-2025 Toyota Tacoma TRD Off-Road 2024-2025 Toyota Tacoma TRD PreRunner 2024-2025 Toyota Tacoma TRD Pro 2024-2025 Toyota Tacoma TRD Sport

SKU
CMBCAM-310287
Brand
ZEDUO

Original price was: $3,730.05.Current price is: $2,595.00.

In Stock
Available to order

Stock or production lead time is confirmed after checkout or enquiry.

International shipping, duties and delivery time depend on the destination. For oversized or wholesale orders, request a shipping quote before payment.

Request a shipping or wholesale quote →
Formal quotation required. The displayed product price excludes international shipping, import duties, taxes and brokerage unless stated in a written quotation. Stock, export packing and the final delivered cost must be confirmed before payment. Request a shipping or wholesale quote.

Buying for your business?

Build a parts list for a bulk quotation. Confirm quantities, packing and delivery requirements with our team.

View enquiry list 0

Description

Our Camburg lower control arms take your Tacoma’s suspension to the next level. Being stock length, you’re able to use your existing coilovers and upper control arms with no need for aftermarket fenders. We’ve incorporated our optional Slapper bump stop system for additional bottom out control and damping. This allows for a plush ride through the small stuff that doesn’t bottom out easily through the bigger hits and G-outs. In stock width configurations, the Slapper bump stop system performs better than a secondary bypass shock and packages much easier. Designing these arms, we set them up for maximum useable wheel travel along with an optimized shock motion ratio. CAD/CAM engineered, the internally boxed construction is considerably stronger than the stock arms and were designed to maximize ground clearance and off-road performance. We include bolt-on aluminum skid plates for added protection. Our Camburg X-Joint XL is an extreme performance, all-weather, all conditions, high angle ball joint that is considerably stronger than anything on the market with its heat-treated 4340 construction. This allows for maximum wheel travel, lower maintenance, longer longevity and a lighter steering response compared to a uniball. We use FK 1? uniballs at the frame rather than cheap bushings that constantly bind and flex under braking. Uniballs allow for zero binding and have zero flex under braking, so your geometry and alignment is always consistent. The pivot spacers have better clamping force in the frame mounts due to the increased surface area which keeps the holes from wearing over time or the alignment cams coming loose and moving while in use. Ready to install with all the necessary hardware included, these are by far the strongest stock length aftermarket arms out on the market. Combine these with our upper control arms, Slapper bump stop system and aftermarket coilovers for the ultimate stock width setup.

This Part Fits:

YearMakeModelSubmodel
2024-2025ToyotaTacomaLimited
2024-2025ToyotaTacomaSR
2024-2025ToyotaTacomaSR5
2024-2025ToyotaTacomaTrailhunter
2024-2025ToyotaTacomaTRD Off-Road
2024-2025ToyotaTacomaTRD PreRunner
2024-2025ToyotaTacomaTRD Pro
2024-2025ToyotaTacomaTRD Sport

Ordering & Delivery

Retail orders

Choose the required product options and quantity before adding to your cart. Review available shipping options and the order total at checkout.

Wholesale enquiries

Add products to your enquiry list and send the quantities and destination. Bulk pricing, packing and dispatch timing are confirmed in your quotation.

Check compatibility

Check the manufacturer part number and vehicle specifications before ordering. Send your vehicle year, make, model and engine details if you need fitment confirmation.

Shipping & support

Delivery timing depends on the product and destination. Contact our team for order-specific information.

Shipping and returns · Contact us